shower

Loading

Shower standing handles improve the safety of anyone who needs support to stand or move around in a shower or tub. Additionally, having a handle that is stable and able to pull or push for ambulation can result in lower odds of falling or sliding in a shower, especially when the floor is wet and risky. These are helpful for anyone with disabilities or older adults losing physical strength and balance.As you age, the small tasks that we used to perform without thinking begin to become more difficult. Certain chores may be quite dangerous as you age. Taking a bath or shower is one such task. According to a study carried out by the CDC and the CDC, of the accidents that weren’t fatal to bathroom users from 200837.3 percent of the injuries were sustained while showering, bathing or taking a bath or shower. There are many actions you can take to avoid injuries and falls within the bath. Non-slip bath mats are a good place to start, along with shower slip-resistant shoes. Another useful thing to consider for your bathroom is installing grab rails or shower standing rails inside the bath or shower to prevent slipping.that’s the topic we’ll be discussing in this article on how to choose the best shower standing handle or grab bar and, with the help of YouTube videos, some instructions on how to set them up.

Choosing the Correct Shower Standing Handles

To be clear To be precise, an shower “standing” handle here is any handle that allows you to shift from a sitting to a standing position. These could be handles that are different sizes based on size of the shower and the abilities/limits of the end user. These kinds of handles are also referred to by the name of grab bars. While they can be used to move from a seated or standing position, where they’re mounted on the shower wall impacts how they’re best used, and we’ll focus on specifically at standing, i.e. changing from a sitting position to standing in contrast to moving from a sitting posture to a seated position (wheelchair into shower chairs, for instance). For the latter, something like a shower transfer bench combined with low-level grab bars would work best. The same principles are applicable to standing handles , just as they do to grab bars, but. This post should be beneficial to both of these applications. Fixed rails are more secure and are consequently safer. The disadvantage is that they require some effort to set up and once they are installed, it can be an enormous task to transfer them to another spot if you’ve not put them in the perfect location. You are also left with repairing the holes when you have them removed.Removable rails aren’t recommended for those who will require them to support your body’s weight, as they depend on suction to grip they may not be secure enough and not be able to support your weight. Their benefit is that they can be moved easily when needed and are able to be used when traveling.

What Is the Best Size for a Shower Handle?

Grab bars and shower handles are available in a variety of sizes ranging from 9 to 42 inches. A grab bar placed on the wall of the shower to assist when getting in or out of the shower must be at least 24” long. A bar this this size can be placed at an angle. This can be beneficial for people of different heights will use the bar or it is going to be used from both seated and standing positions . A grab bar designed for use as an aid for balance could be shorter, but should not be less than 12 inches long.

What is the Correct Height for a Shower Handle?

There is no set height for grab bars and shower rails. But it is recommended that the Americans with Disabilities Act (ADA) Standards for Accessible Design recommends certain heights which are followed by commercial and public institutions.

For grab bars that are horizontal, the ADA Standards require a height between 33 and 36 inches away from the floor that is finished of the bathroom shower or tub.

Use this as a guide, but it is more important to choose a comfortable height for the person to use the bar. An exercise you can carry out before installing a bar is to get the person who will to be using the bar to get in to and out of shower. The person should think that he/she is dizzy or tired and consider where s/he would naturally reach out to for support. This should give you an idea of where you should place the bar.

Should Grab Bars be Vertical or Horizontal?

According to the South Canterbury District Health Board Handrails that are designed to increase security when you step into and out of the shower must have a vertical. The bottom of the grip should be the level of your elbow when standing with arms by your sides. Horizontal rails are more effective for assisting with balance when sitting inside the shower. The horizontal rails must be put on the same side of the shower’s wall at the level of the belly button. This rail can be used while standing in the shower as and when entering the shower.

How Much Weight Will a Grab Bar Hold?

An grab bar must be able to hold 250 pounds of weight. Fixed grab bars that have been correctly installed will achieve this. Grab bars that are removable are not guaranteed to hold this amount of weight.When choosing a grab bar it is best to select one that is ADA certified. The ADA requires that grab bars be able to support a weight of 500 pounds. You must determine if this is necessary according to the person who will use it.

Moen 24” Bathroom Handle

The Moen 24 inch Bathroom Handle is elegant and of high-end quality. It is made of stainless steel and thus should complement the decor of the majority of bathrooms. Hidden screws provide a sleek design. When properly installed, it will hold a weight of up to 500 pounds. It’s fitted with the SecureMount design , however the SecureMount and studs aren’t included.

Invisia Grab Bars – Great for Tubs

Invisia produces high-end (and thus more costly) shower handles. This is among their specialties, so they do it well that’s why they’re not just durable but the design is attractive as well. If you need shower handles that accommodate tub use as well they offer handles that go around the faucet’s control area and within the soap dish, and also make one with a toilet paper holder for getting on/off the toilet more easily.Moen’s Flip-Up bathroom Grab Bar is ideal for any home where individuals of different ages share a bathroom. The bar is easily removed when it is not needed and is available in a flash for those who do require it. It is ADA compliant and supports up to 300 pounds. It’s length is 30 inches and the diameter is 1.25 inches.

Gotega Two Pack Shower Grab Bar

The Gotega Two Pack Shower Grab Bar is perfect for installing a bathroom for an elderly individual and will require quite a few support handles. Both bars are 12 inches long and have an overall size at .98 inches. They are made from stainless steel and can hold a weight of up to 500 pounds. Flanges and screws are provided to make installation easy and quick.