Want to access a blazing-fast and seamless internet connection in every corner of your house? If the answer to the question is yes, then it is recommended that you perform Netgear AC750 setup. Netgear AC750 is a dual-band WiFi router that delivers amazing WiFi speed. Once you are done setting up an AC750 WiFi router in your home, not only will you be able to access the internet in every corner of your home but you can also connect as many devices as you want with your wireless network .

Walk through the step-by-step guidelines mentioned in this article to perform Netgear AC750 setup manually.

Steps to Install a Netgear AC750 WiFi Router

Router Configuration

Before getting down to the login steps, you must learn how to physically set up your WiFi device. Here’s how to physically configure your device:

  • Remove any extra cables connected to the existing modem.
  • Plug the AC750 router into the wall socket and press the Power button.
  • Wait for a couple of seconds until the power LED turns green.
  • Next, connect your router and modem either wirelessly or by using an Ethernet cable.

Netgear Router Login

Once the physical setup of the Netgear AC750 router is completed, switch on your laptop and follow the below-given instructions:

  • Launch a web browser (Google Chrome, Microsoft Edge, etc) on your laptop.
  • Type routerlogin.net or default IP in the address bar and hit Enter.
  • You will be prompted to fill in the default username and password of your device.
  • Log in to your device by entering the default admin details.
  • Once the Netgear Genie dashboard will appear, follow the on-screen prompts.

In this manner, you’ll be able to perform Netgear AC750 setup manually. On the off chance, if you get stuck at any point while setting up the router, take the help of the below-given troubleshooting steps.

Resolved: Netgear AC750 Setup Issues

No matter what issues you’re facing while setting up the AC570 router, these troubleshooting steps will surely help you fix them:

  • Make sure that your Netgear router, as well as the modem, are receiving an adequate power supply from the wall socket.
  • If the wall socket your router plugged into is damaged, get it fixed immediately. Or, plug your router into another wall socket.
  • If you are using an Ethernet cable to connect your router and modem, ensure that it is finger-tight and free of cuts or any other damages.
  • Power LED not turning green? No problem! To troubleshoot the issue, power cycle your Netgear AC750 WiFi router.
  • Whatever web browser you use to perform Netgear router login, don’t forget to update it before putting it to use.
  • Not certain about the default username and password of your router? Worry not! Referring to the Netgear manual will help you out here!
  • Make sure that you enter the correct web address. Otherwise, you won’t be able to complete the router setup process successfully.
  • See to it that the connection between your Netgear AC750 router and modem is good. If it isn’t, then it’s probably because your devices are placed far away from each other. Thus, make sure that you place your WiFi devices in close proximity.
  • Disable all the ad-blocking apps before performing Netgear router setup.

Let’s hope that these troubleshooting tips would’ve helped you resolve whatever issue you were facing during Netgear AC750 setup.


This was all about how to install a Netgear AC750 router manually. Make sure that you follow these instructions in the exact order as they are written. Or else, you’ll continue to face the same setup issues.

By admin

Writing and blogging is my passion. Providing meaningful information to readers is my object.